Optical Systems Design OSD2524, User Manual

Page: 170 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 170
VLAN ID
VLAN identifier (VID) for the interface as defined in IEEE 802.1Q-2003.
L2 Priority
L2 Priority is the Layer 2 priority to be used for the specified application type. L2 Priority may specify
one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004. A value of 0 represents use of
the default priority as defined in IEEE 802.1D-2004.
DSCP
DSCP value to be used to provide Diffserv node behaviour for the specified application type as defined in
IETF RFC 2474. DSCP may contain one of 64 code point values (0 through 63). A value of 0 represents
use of the default DSCP value as defined in RFC 2475.
Adding a new policy
Click to add a new policy. Specify the Application type , Tag , VLAN ID , L2 Priority and
DSCP for the new policy. Click "Save".
The number of policies supported is 32
POLICIES INTERFACE CONFIGURATION
Every interface may advertise a unique set of network policies or different attributes for
the same network policies, based on the authenticated user identity or interface
configuration.
Interface
The interface name to which the configuration applies.
Policy Id
The set of policies that shall apply to a given interface. The set of policies is selected by check marking
the checkboxes that corresponds to the policies.
Buttons
: Click to add new Policy
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.