Optical Systems Design OSD2524, User Manual

Page: 242 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 242
Mirroring & Remote Mirroring Configuration
Mirroring is a feature for switched port analyzer. The administrator can use the Mirroring to
debug network problems. The selected traffic can be mirrored or copied on a destination port
where a network analyzer can be attached to analyze the network traffic.
Remote Mirroring is an extend function of Mirroring. It can extend the destination port in other
switch. So the administrator can analyze the network traffic on the other switches.
If you want to get the tagged mirrored traffic, you have to set VLAN egress tagging as "Tag
All" on the reflector port. On the other hand, if you want to get untagged mirrored traffic, you
have to set VLAN egress tagging as "Untag ALL" on the reflector port.
SESSION
Select session id to configure.
MODE
To Enabled/Disabled the mirror or Remote Mirroring function.
TYPE
Select switch type.
Mirror
The switch is running on mirror mode.
The source port(s) and destination port are located on this switch.
Source
The switch is a source node for monitor flow.
The source port(s), reflector port and intermediate port(s) are located on this switch.
Intermediate
The switch is a forwarding node for monitor flow and the switch is an option node.
The object is to forward traffic from source switch to destination switch.
The intermediate ports are located on this switch.
Destination
The switch is an end node for monitor flow.
The destination port(s) and intermediate port(s) are located on this switch.
VLAN ID
The VLAN ID points out where the monitor packet will copy to. The default VLAN ID is 200.