Optical Systems Design OSD2524, User Manual

Page: 280 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 280
DETAILED LINK OAM STATUS FOR PORTS
Monitor
→
Link OAM
→
Port Status
This page provides Link OAM configuration operational status.
The displayed fields shows the active configuration status for the selected port.
LOCAL AND PEER
Mode
The Mode in which the Link OAM is operating, Active or Passive.
Unidirectional Operation Support
This feature is not available to be configured by the user. The status of this configuration is retrieved from
the PHY.
Remote Loopback Support
If status is enabled, DTE is capable of OAM remote loopback mode.
Link Monitoring Support
If status is enabled, DTE supports interpreting Link Events.
MIB Retrieval Support
If status ie enabled DTE supports sending Variable Response OAMPDUs.
MTU Size
It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the
remotes Maximum PDU Size and the smaller of the two is used.
Multiplexer State
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. In case of
discarding, the device discards all the non-OAMPDU's.
Parser State