Optical Systems Design OSD2524 User Manual Download Page 268

Page: 268 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 268

FAN STATUS

Monitor

→

Green Ethernet

→

Fan

This page provides an overview of information related to the fan control.

FAN STATUS

Fan Speed

Shows the speed that the fan is currently running at in RPM (Rounds Per Minute)

Temperature Sensor

Shows the temperature of the temperature sensor(s) in Celsius degrees.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

: Click to refresh the page immediately.

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Optical Systems Design OSD2524, User Manual, Page: 268 / 402

Search results

Summary of Contents for OSD2524

Reviews: