Optical Systems Design OSD2524, User Manual

Page: 236 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 236
The displayed settings are:
DSCP
Maximum number of supported DSCP values are 64 and valid DSCP value ranges from 0 to 63.
Ingress
Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS class and DPL
map.
There are two configuration parameters for DSCP Translation -
1. Translate
2. Classify
1. Translate
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify
Click to enable Classification at Ingress side.
Egress
There are the following configurable parameters for Egress side -
1. Remap DP0
Controls the remapping for frames with DP level 0.
2. Remap DP1
Controls the remapping for frames with DP level 1.
1. Remap DP0
Select the DSCP value from select menu to which you want to remap. DSCP value ranges from 0 to 63.
2. Remap DP1
Select the DSCP value from select menu to which you want to remap. DSCP value ranges from 0 to 63.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
DSCP CLASSIFICATION