Optical Systems Design OSD2524, User Manual, Page: 247 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 247
PTP EXPERNAL CLOCK MODE
Configuration
→
PTP
This page allows the user to configure and inspect the current PTP clock settings.
PTP EXTERNAL CLOCK CONFIGURATION
One_PPS_Mode
This Selection box will allow you to select the One_pps_mode configuration.
The following values are possible:
1. Output : Enable the 1 pps clock output
2. Input : Enable the 1 pps clock input
3. Disable : Disable the 1 pps clock in/out-put
External Enable
This Selection box will allow you to configure the External Clock output.
The following values are possible:
1. True : Enable the external clock output
2. False : Disable the external clock output
Adjust Method
This Selection box will allow you to configure the Frequency adjustment configuration.
1. LTC frequency : Select Local Time Counter (LTC) frequency control
2. SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE
3. Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW
4. LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by
means of SyncE)