Optical Systems Design OSD2524 User Manual Download Page 118

Page: 118 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 118

ADDING A NEW SERVER

Click

to add a new RADIUS server. An empty row is added to the table, and the RADIUS server can

be configured as needed. Up to 5 servers are supported.
The delete button can be used to undo the addition of the new server.

Buttons

:Click to add a new RADIUS server.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Server Configuration

Configuration

→

Security

→

AAA

→

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands

Optical Systems Design OSD2524, User Manual

Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands