Optical Systems Design OSD2524, User Manual

Page: 192 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 192
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This way a port
is configured to use a number of VLAN Translation mappings easily by simply configuring it to use a
given group. Then number of possible groups in a switch is equal to the number of ports present in this
switch. A port can be configured to use any of the groups, but only one at any given time. Multiple ports
can be configured to use the same group. A valid Group ID is an integer value from 1 to 14.
Note: By default, each port is set to use the group with Group ID equal to the port number. For example,
port #1 is by default set to use group with GID = 1.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
: Click to save changes.
: Refreshes the displayed table starting from the input fields.
VLAN TRANSLATION MAPPING TABLE
Configuration
→
VLAN Translation
→
VLAN Translation Mappings