Optical Systems Design OSD2524, User Manual

Page: 317 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 317
RADIUS Server Status Overview
Monitor
→
Security
→
AAA
→
RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the
Authentication configuration page.
RADIUS SERVERS
#
The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address
The IP address of this server.
Authentication Port
UDP port number for authentication.
Authentication Status
The current status of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up and running.
Ready
: The server is enabled, IP communication is up and running, and the RADIUS module is ready to
accept access attempts.
Dead (X seconds left)
: Access attempts were made to this server, but it did not reply within the
configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Accounting Port
UDP port number for accounting.
Accounting Status
The current status of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up and running.
Ready
: The server is enabled, IP communication is up and running, and the RADIUS module is ready to
accept access attempts.
Dead (X seconds left)
: Access attempts were made to this server, but it did not reply within the
configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.