Optical Systems Design OSD2524, User Manual

Page: 16 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 16
1.
Connect the Console Port on UUT to PC with USB cable (Type A to Type B).
2.
Using HyperTerminal to set up the following parameters.
•
Baud Rate: 115200
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Flow Control: None
3.
Check the link by pressing <ENTER>. The line should jump to the next line.
4.
Using the Username and password to login the switch
•
Default Username: admin
•
Default Password: (None)
CLI COMMAND FOR IP CONFIGURATION
•
show ip interface brief : Display the current IP address and subnet mask.
•
configure terminal -> interface vlan 1 -> ip address <IP address> <subnet mask> : Setup the switch IP
address.
•
copy running-config startup- config : Save the current configuration to start-up configuration.
PS: All configuration changes must be saved otherwise all the changes will be lost after rebooting!