Optical Systems Design OSD2524 User Manual Download Page 102

Page: 102 / 402

OPTICAL SYSTEMS DESIGN

DOC ID: 10120001

OSD2524 OPERATOR MANUAL

PAGE 102

Configure the rate limiter for the ACL of the switch.

Rate Limiter ID

The rate limiter ID for the settings contained in the same row and its range is

Rate

The valid rate is

0-3276700

in pps.

0, 100, 200, 300, ..., 1000000

in kbps.

Unit

Specify the rate unit. The allowed values are:

pps

: packets per second.

kbps

: Kbits per second.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Access Control List Configuration

Configuration

→

Security

→

Network

→

ACL

→

Access Control List

Summary of Contents for OSD2524



















































































































































































































































































































































































































Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands

Optical Systems Design OSD2524, User Manual

Search results

Summary of Contents for OSD2524

Reviews:

Related manuals for OSD2524

Brands by name

Popular brands