Optical Systems Design OSD2524, User Manual

Page: 111 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 111
VLAN Mode Configuration
Configuration
→
Security
→
Network
→
ARP Inspection
→
VLAN Configuration
This page provides ARP Inspection related configuration.
NAVIGATING THE VLAN CONFIGURATION
Each page shows up to 9999 entries from the VLAN table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the VLAN Table. The first displayed will be the one with the lowest
VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table.
Clicking the button will update the displayed table starting from that or the closest
next VLAN Table match. The will use the next entry of the currently displayed VLAN
entry as a basis for the next lookup. When the end is reached the warning message is shown in
the displayed table. Use the button to start over.
VLAN Mode Configuration
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port setting on Port
mode configuration web page. Only when both Global Mode and Port Mode on a given port are enabled,
ARP Inspection is enabled on this given port. Second, you can specify which VLAN will be inspected on
VLAN mode configuration web page. The log type also can be configured on per VLAN setting.
Possible types are:
None
: Log nothing.
Deny
: Log denied entries.
Permit
: Log permitted entries.
ALL
: Log all entries.
Buttons