Optical Systems Design OSD2524, User Manual, Page: 309 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 309
For MAC-based Auth., this column holds the MAC address of the attached client.
Clicking the link causes the client's Backend Server counters to be shown in the Selected Counters table.
If no clients are attached, it shows
No clients attached .
VLAN ID
This column holds the VLAN ID that the corresponding client is currently secured through the Port
Security module.
State
The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to
forward frames on the port, and in the unauthenticated state, it is blocked. As long as the backend server
hasn't successfully authenticated the client, it is unauthenticated. If an authentication fails for one or the
other reason, the client will remain in the unauthenticated state for Hold Time seconds.
Last Authentication
Shows the date and time of the last authentication of the client (successful as well as unsuccessful).
Buttons
: The port select box determines which port is affected when clicking the buttons.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
: Click to refresh the page immediately
: This button is available in the following modes:
• Force Authorized
• Force Unauthorized
• Port-based 802.1X
• Single 802.1X
Click to clear the counters for the selected port.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear both the port counters and all of the attached client's counters. The "Last Client"
will not be cleared, however.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear only the currently selected client's counters.