Optical Systems Design OSD2524, User Manual, Page: 41 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 41
LED POWER REDUCTION CONFIGURATION
Configuration
→
Green Ethernet
→
LED
The system status LED shows whether the system is running. The LED is green when system is
running and no errors are detected. If errors has been detected the status LED will indicate this
by blinking red
Front Ethernets Port LED
The front Ethernet ports have a dual color LEDs per port. The port LEDs is placed in a block
(1-high for SFPs, 2-high for RJ45s) to the left of the ports.
A pushbutton and a 4-high tower of LEDs is placed next to the front ethernet port LEDs. The
pushbutton selects between four different port LED modes, indicated by the 4-high LED mode
tower. After 30 seconds the LED mode falls back to mode A.
The port LED modes are named A through D and shows the following
PORT LED INDICATION MODE D:
Green (1000Mbit): Solid=Link, Blink=Activity
Orange (10/100Mbit): Solid=Link, Blink=Activity
PORT LED INDICATION MODE C:
Green: Solid=Full Duplex Off=No link
Orange: Solid=Half Duplex, Blink: Collisions
PORT LED INDICATION MODE B:
Green: Solid = Link, Blink=Activity