Olympus FLUOVIEW FV300, User Manual

Page: 560 / 564

TROUBLESHOOTING GUIDE
VI .
TROUBLESHOOTING
VI.
1 - 4
Page
Phenomenon Cause Treatment Manual Ref. Pages
10. Image is dark and noisy. The confocal aperture is too
small.
Adjust the confocal aperture
to an optimum size. 1-2-6, OPERATION
INSTRUCTIONS
The HV of photomultiplier
tube exceeds 800. Set HV at no more than 800.
If the image is still dark,
adjust GAIN. 2-2-1-3-9,
OPERATION
INSTRUCTIONS
The scan speed is too high. Decrease the scan speed or
integrate the image.
2-2-1-3-10 & 2-2-1-
5, OPERATION
INSTRUCTIONS
11. The position
reproduction of the Z-
motor is poor.
The Z-position fluctuates
because the coarse
movement knob of
microscope is too light. Make the microscope’s
coarse movement knob
heavier by turning the
microscope’s rotation
tension adjustment ring. Instruction manual
of microscope
12. The [Acquire] panel
cannot be displayed.
The power unit is not
recognized. Check the connection
between the computer and
power unit.
Turn the power unit ON. 1-2-1, OPERATION
INSTRUCTIONS
13. The scale of the [Z
Stage] sub-panel in the
[Acquire] panel cannot
be moved.
The Z-stage (Z revolving
nosepiece) motor is not
excited. Check the [Locked] check
box in the [Z Stage] sub-
panel. 2-2-1-3-7,
OPERATION
INSTRUCTIONS
14. The fine movement knob
of microscope cannot
be turned or is not
smooth.
The Z-stage (Z revolving
nosepiece) motor is excited. Clear the [Locked] check box
in the [Z Stage] sub-panel. 2-2-1-3-7,
OPERATION
INSTRUCTIONS
15. The image cannot be
saved in the disk.
The disk drive is not ON. Ensure that the MO disk
drive is ON Instruction manual
of MO disk
The MO disk is not
recognized. Check the cable connection. Instruction manual
of MO disk
The disk is not loaded in the
drive. Insert the disk properly. Instruction manual
of MO disk
The disk is write-protected. Release the write protection. Instruction manual
of MO disk
The disk is not formatted.
(either floppy disk or MO
disk). Format the disk before use. Appendix D,
OPERATION
INSTRUCTIONS
The available space in disk
is insufficient. Increase the available space
in disk by deleting
unnecessary files or use
another disk (be sure to
format a new disk). -
Appendix D,
OPERATION
INSTRUCTIONS
16. The image cannot be
output at the printer.
The printer is not recognized. Ensure that the printer is ON. Instruction manual
of printer
The printer is not recognized. Check the cable connection. Instruction manual
of printer
The printer is out of paper. Supply paper. Instruction manual
of printer