Olympus FLUOVIEW FV300, User Manual

Page: 148 / 564

APPLIED OPERATIONS
/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2 - 3 4
Page
1 Setting the observation mode
1. Click the [Line] option button in the [Mode] group box.
2. In the [Acquire] panel, select the XT observation mode option button.
2 Setting the observation line
1. A line is displayed on the image in the [Live] panel. Place the mouse pointer arrow
on the line and drag it to the position you want to observe.
3 Acquiring image
Click the <XT> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
The XT observation acquires the images of the same position (line) for 2000 times
successively at the set scanning speed. For reference, the time required for the
image acquisitions is shown in the frame on the bottom left of the [Scan Speed]
group box.
The number of image acquisitions can be changed by changing the value in the [N]
text box in the [Time Series] sub-panel.
While acquiring an image in the XT observation mode, clicking the <STOP SCAN>
button changes the buttons at the upper part of the [Acquire] panel as shown below. The
<Resume> button restarts image acquisition at the frame next to the frame where the
acquisition is suspended.
<Resume> button
Restarts image acquisition at
the frame next to the frame
where the acquisition is
suspended.
<Series Done> button
Determines the acquired
images. Once this button is
clicked, it is not possible to
append an image.