Olympus FLUOVIEW FV300, User Manual, Page: 185 / 564

APPLIED OPERATIONS
/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2 - 7 1
Page
1. Acquire an image in the XY observation mode. For the operation procedure, see
section 2-2-1, “Image Acquisition with XY observation”.
2. Select <ZoomIn> under the [Surface XY] option button in the [Mode] group box in
the [Acquire] panel. A frame indicating the control range appears in the [Live]
panel.
3. Move the frame to the area you want to observe. To move the frame, place the
mouse pointer inside it and drag the mouse.
4. Change the frame size. Place the mouse pointer inside the frame and click to
display square handles around the frame. Then place the mouse pointer on one of
the handles and drag it to change the frame size. (Here the X:Y ratio of the frame is
not changed.)
5. Change the number of pixels in the Y direction. Right click the mouse on the frame
to display a pop-up menu and select [Size] in it to display square handles around
the frame. Place the mouse pointer on one of these handles and drag it to change
the number of pixels. Note that the X:Y ratio of the frame is not changed during
this.
If high-speed image acquisition is required, decrease the number of pixels in the Y
direction.
Handle