Olympus FLUOVIEW FV300, User Manual

Page: 48 / 564

Getting Started FLUOVIEW/
Basic Operations
IV.
OPERATION INSTRUCTIONS
IV .
1 - 1 0
Page
(5) Filters
These filters are used to adjust transmitted light.
x
Be sure to disengage any filter from the light path for transmitted observation
using laser. Leaving a filter engaged in the light path will degrade the image
quality.
When you perform transmitted observation using laser with BX61WI, use the
filter knob to disengage the LBD from the light path and engage the FR (Frost)
into the light path. Disengaging the FR (Frost) from the light path may generate
interference fringes on an image.
(6) Universal condenser
Used for transmitted lighting. In addition, the rotary turret for the transmitted light
DIC slider and the polarizing plate for differential interference observation (polarizer)
are also provided.
x
To perform differential interference observation, engage the transmitted light
DIC slider (optional) matching the objective in use in the light path. (For both
direct observation and laser differential interference observation)
x
To perform direct differential interference observation or laser differential
interference observation, engage the polarizing plate in the light path.
(7) TV adapter light path selector (Combination with FVX-LVT)
Select the light path between laser microscopic observation and TV/photography
observation.
x
Set to the pushed-in position for TV or photography observation.
x
Set to the pulled-out position for laser microscopic observation.
(8) Hand switch U-HSTR2 (U-FH is optionally available with BX61)
This is the hand switch to operate the BX motorized system.
Connect the filter wheel of BX to connector of the following in
the back of UCB.
x
FW0: FW1
x
FWR: FW2
x
FWT: FW3
NOTE