Mindray WATO EX-55Pro, Service Manual

Page: 203 / 474

7-7
4. Select [
Begin]
to calibrate the flow sensor. During the calibration, you can select
[
Cancel]
to abort.
5. The screen shown below is displayed if the ongoing calibration is aborted. Select [
Try
Again
] to do the calibration again or select [
Done
] to exit the calibration screen.
6. The screen shown below is displayed if the flow sensor calibration fails. Select [
Try
Again
] to do the calibration again or select [
Done
] to exit the calibration screen.