Micro Motion CDM100M, Configuration And Use Manual

Page: 175 / 220

Sample calibration certificate: K format, SI units Figure A-2:
DENSITY CALIBRATION CERTIFICATE
CDM100PA18MBAZ00EANZZ 2012.10031 Model Code:
Customer Tag: Serial No:
Calibration Date:
Pressure Test:
2013-07-01 11:05:22
225 bar(g)
Calibration ID: 1.29825731
7835|7845 "K" Coefficients (SI Units)
K0 = -3.000
Density Calibration Coefficients @20°C
Temperature Compensation Coefficients:
Pressure Compensation Coefficients:
K18 = -3.154066E-004
K19 = -9.992198E-004
K20A=
1.238665E-004
Calibrated Range = 300-1300 kg/m³ (0.3-1.300 g/cm³)
K1 = 0
K2 = 1.432987E-007
K20B=
K21A=
K21B=
Range: 1-41 bar(a) Range: 31-71 bar(a) Range: 61-101 bar(a) Range: 101-151 bar(a)
1.238665E-004 1.238665E-004 1.238665E-004
0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0
Time Period, TP sec μ Density (kg/m³)
Density Calibration Data:
5065.2054 0.97
5587.3151 798.82
5857.0031 1240.79
Performance Check:
Error (kg/m³) Density (kg/m³)
998.22
-0.08
Known Density Verification Data:
765.1 Verification Time Period (Air) @ 20°C = μsec
CALIBRATED BY:
D = Density (uncompensated)
TP = Time period
P= Pressure
Definitions:
°C
kg/m³
kg/m³
Dt = Density (Temperature compensated)
Dp = Density (Pressure & Temperature compensated)
kg/m³
µsec
T = Temperature
bar(a)
Form Rev: 1 2013-08-29 13:55:05 Printed Page 2 of 3
All equipment used for this calibration is calibrated at routine intervals against
standards that are traceable to the International System of Units (SI).
Emerson Process Management Micro Motion, Inc. 7070 Winchester Circle, Boulder, CO 80301
SAMPLE
Calibration certificate
Configuration and Use Manual 169