Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 527 / 588

505
Practical advice
Changing the bulbs
Changing the bulbs in the main-beam
headlamps
왘
Switch off the lights.
왘
Open the bonnet.
Vehicles with halogen headlamps
1
Bulb holder
2
Grip
왘
Turn cover 2 (
컄
page 503) anti-clock-
wise and remove it.
왘
Turn bulb holder
1
anti-clockwise un-
til it disengages.
왘
Remove bulb holder
1
.
왘
Press the tabs on the connector to the
side.
왘
Remove the bulb from the connector.
왘
Insert the new bulb into the connector.
왘
Fit bulb holder
1
into the guide in the
headlamp with grip
2
pointing down
and to the right.
왘
Turn the bulb holder clockwise until it
engages and grip
2
is vertical.
Vehicles with bi-xenon headlamps*
(main-beam spot lamp*)
You can only change the main-beam spot
lamp* halogen bulb on vehicles with bi-
xenon headlamps*.
1
Bulb holder
2
Cable duct
3
Grip
왘
Turn cover 2 (
컄
page 503) anti-clock-
wise and remove it.
왘
Turn bulb holder
1
anti-clockwise un-
til it disengages.
왘
Remove bulb holder
1
.
왘
Remove the bulb from the socket.
P82.10-4109-31
G
Risk of injury
Xenon or bi-xenon bulbs are under high volt-
age. Do not, therefore, remove the cover on
xenon or bi-xenon bulbs. Do not change xe-
non or bi-xenon bulbs yourself, but have
them replaced at a qualified specialist work-
shop which has the necessary specialist
knowledge and tools to carry out the work
required.
P82.10-4110-31
컄컄