Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 526 / 588

504
Practical advice
Changing the bulbs
!
Make sure that no washer fluid escapes.
왘
To fit: guide the lower retaining lug into
the rubber grommet on the longitudinal
member and fit the washer fluid reser-
voir into the bracket.
왘
Turn retaining screw
1
clockwise.
Changing the left-hand dipped-beam
headlamp
왘
Switch off the lights.
왘
Open the bonnet.
Dipped-beam headlamps (halogen head-
lamps)
1
Bulb holder
2
Cable duct
Vehicles with halogen headlamps
왘
Turn cover 1 (
컄
page 503) anti-clock-
wise and remove it.
왘
Turn bulb holder
1
anti-clockwise un-
til it disengages.
왘
Remove bulb holder
1
.
왘
Pull the bulb out of the socket by its
base.
왘
Insert the new bulb into the socket.
왘
Fit bulb holder
1
into the guide in the
headlamp.
The lug on the bulb holder must point
up and to the left and cable duct
2
must point to the right.
왘
Turn bulb holder
1
clockwise until it
engages.
Cable duct
2
points down and to the
right.
Vehicles with bi-xenon headlamps*
P82.10-4108-31
G
Risk of injury
Xenon or bi-xenon bulbs are under high volt-
age. Do not, therefore, remove the cover on
xenon or bi-xenon bulbs. Do not change xe-
non or bi-xenon bulbs yourself, but have
them replaced at a qualified specialist work-
shop which has the necessary specialist
knowledge and tools to carry out the work
required.