Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 541 / 588

519
Practical advice
Resetting NECK-PRO comfort head restraints*
If the NECK-PRO comfort head restraints
have been triggered in an accident, you
must reset the head restraints on the driv-
er’s and front-passenger seats. If this is
not done, the additional protection these
head restraints provide will not be availa-
ble in the event of another rear collision.
You can tell that the NECKPRO comfort
head restraints have been triggered be-
cause they will then be tilted forwards.
1
Reset tool
왘
Take reset tool
1
from the vehicle tool
kit in the boot.
왘
Insert reset tool
1
into the bore hole
at the top of the NECK-PRO comfort
head restraint and between the head
restraint upholstery and the rear trim.
왘
Press reset tool
1
down until you hear
the head restraint deployment mecha-
nism engage.
왘
Remove reset tool
1
from the bore
hole.
왘
Press the upholstery of the NECK-PRO
comfort head restraint back with force
until the head restraint engages.
왘
Repeat the procedure for the second
NECK-PRO comfort head restraint.
i
If you have problems when resetting the
NECK-PRO comfort head restraints, have this
work carried out at a qualified specialist work-
shop, e.g. a Mercedes-Benz Service Centre.
For safety reasons, have the NECK-PRO comfort
head restraints checked at a qualified specialist
workshop, e.g. a Mercedes-Benz Service Centre,
following a rear collision.
Resetting NECK-PRO comfort head
restraints*
P91.16-2327-31