Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 72 / 588

50
Safety
Occupant safety
!
When fitting the child restraint system,
make sure that the seat belt for the middle seat
is not trapped.
1
Securing ring
2
Upholstered fitting
3
Installation device
왘
Fold upholstered fitting
2
upwards.
왘
Turn installation device
3
vertically so
that upholstered fitting
2
does not
fold downwards.
왘
Fit the child seat on the two securing
rings
1
. Follow the manufacturer’s in-
stallation instructions when fitting the
child seat.
G
Risk of injury
If the child restraint system is not fitted cor-
rectly to a suitable seat, the child may not be
secured in the event of an accident or sud-
den braking and may be seriously or fatally
injured. Therefore, follow the manufactur-
er’s installation instructions when fitting the
child restraint system.
On the rear seats, only use child restraint
systems with an ISOFIX child seat securing
system which have been recommended for
use in Mercedes-Benz vehicles.
An incorrectly fitted child restraint system
could come loose and fatally injure the child
or other vehicle occupants. When fitting the
child restraint system, make sure that it is
engaged in the securing rings on both sides.
G
Risk of injury
If the child restraint system or its securing
system, e.g. the ISOFIX child seat securing
system, is damaged or subjected to a load in
an accident, the child secured in the re-
straint system may be seriously or fatally in-
jured in the event of an accident, heavy
braking or sudden change in direction.
You must therefore have child restraint sys-
tems that are damaged or have been sub-
jected to a heavy load in an accident
checked immediately along with their
mountings at a qualified specialist workshop
and replaced if necessary. This will have the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use a Mercedes-Benz
Service Centre for this purpose. In particu-
lar, work relevant to safety or on safety-
related systems must be carried out at a
qualified specialist workshop.
P91.12-2805-31