Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 225 / 588

203
Operating systems
COMAND system settings
왘
Select “Yes” or “No” .
If you select “No” , the voice training
will be cancelled. The data from the
first part is stored automatically.
If you select
“Yes” , the second part will
begin.
Voice training is completed at the end of
the second part. You will see a message to
this effect. The data from the second part
is stored automatically.
Exiting during the first or second part of
voice training
왘
Select “Cancel” .
A prompt appears asking whether you
really do wish to exit.
왘
Select “Yes” or “No” .
If you select “Yes” , the voice training
will be cancelled. The data from the
part at which you exited is not stored.
If you select
“No” , the part at which you
stopped begins again.
Deleting existing voice training data
왘
Select “Vehicle” “System settings”
“Linguatronic” “Delete individual-
isation” .
A prompt appears asking whether you
really do wish to delete.
왘
Select “Yes” or “No” .
The voice training data will either be
deleted or not, depending on your se-
lection.
왘
Select “Vehicle” “System settings”
“Language” .
The language list appears. The
R
dot
indicates the current setting.
왘
To change the setting: select the de-
sired language.
The language is set.
1
Programmable button
You can assign the following predefined
functions to the
P
programmable but-
ton:
앫
“Rear window blind” *
You can use the programmable button
to extend or retract the rear window
blind.
앫
“Display off”
You can use the programmable button
to switch the COMAND display on or
off.
Setting the system language
Assigning the programmable button
(favourites)
P68.20-3459-31