Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 157 / 588

135
Operating systems
COMAND navigation system* (introduction)
i
Each magazine tray button
2
indicates the
status of the corresponding magazine tray by
means of an LED.
앫
LED off = magazine tray is empty
앫
LED constantly lit = magazine tray is loaded
왘
Press one of magazine tray buttons
2
.
If a disc is loaded, it will be ejected.
왘
Take the disc out of slot
1
.
왘
Wait until the LED for magazine button
2
which you pressed flashes quickly.
왘
Slide the DVD into slot
1
with the
printed side facing upwards.
COMAND draws the DVD in.
Updating process
After you have loaded the DVD, you will
see a message to the effect that the disc
does not contain a recognisable audio/
video format.
왘
To confirm the message: press
n
.
COMAND checks whether the map
software on the DVD is compatible with
the vehicle’s navigation system and
whether it is compatible with the cur-
rent system software.
If map software is not compatible with
the navigation system:
You will see a message that the update is
not possible.
왘
To confirm the message: press
n
.
COMAND ejects the DVD.
왘
Take the DVD out of slot
1
.
왘
Load a DVD which is compatible with
the vehicle’s navigation system.
If map software is not compatible with
the current system software:
You will see a message that the system
software and the map software are not
compatible.
왘
To confirm the message: press
n
.
COMAND ejects the DVD.
왘
Take the DVD out of slot
1
.
왘
Have the system software updated at a
Mercedes-Benz Service Centre.
i
The map software cannot be updated until
the system software has been updated.
If map software is compatible with the
navigation system and the current sys-
tem software:
COMAND checks whether the map data on
the DVD is already installed.