Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 217 / 588

195
Operating systems
COMAND address book
왘
Select “Save” .
COMAND stores the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
Otherwise, you will see a prompt ask-
ing whether one of the existing num-
bers should be overwritten.
왘
Select “Yes” or “No” .
If you select “Yes” , a selection list will
appear containing the four existing
numbers.
왘
Select the number to be overwritten.
COMAND overwrites the selected
number with the new data.
Adding to a telephone number data
field
i
Each address book entry may contain up to
four data fields for private telephone numbers
and four data fields for business telephone num-
bers.
This function is not possible for entries from the
phone book on the mobile phone.
왘
Display the details about an entry and
highlight the telephone number data
field (
컄
page 193).
왘
Select “Options” “Add tel. no.” .
왘
Select a number category, e.g.
“Home” .
왘
Select a telephone category, e.g.
“Landline telephone number” .
왘
Select “Save” .
COMAND adds the data field to the entry if
there are fewer than four numbers as-
signed to the entry in the selected number
category. You can now enter a number into
the data field.
왘
Proceed as described in the “To enter
data into a field” operating step in the
“Creating a new address book entry”
section (
컄
page 190).
If four numbers are already stored for the
entry in the selected number category, a
prompt will appear asking whether one of
the data fields should be overwritten.
왘
Select “Yes” or “No” .
If you select “Yes” , a selection list will
appear containing the four data fields.
왘
Select the field to be overwritten.
COMAND deletes the number from the
field selected. You can now enter a
number into the data field.
왘
Proceed as described in the “To enter
data into a field” operating step in the
“Creating a new address book entry”
section (
컄
page 190).
i
To do this, COMAND must be equipped with
a telephone*. The mobile phone must be insert-
ed into the bracket.
왘
Display the details about an entry and
highlight the telephone number data
field (
컄
page 193).
왘
Press
n
and select “Call” .
The telephone* makes the call.
i
If COMAND is not equipped with the SMS
function, the telephone* starts dialling as soon
as
n
is pressed.
i
The “Call” menu item is only available if
COMAND is equipped with the SMS function.
or
Calling a number stored in an entry
컄컄