Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 276 / 588

254
Controls
Opening and closing
Closing and locking the vehicle with
KEYLESS GO
1
KEYLESS GO button
왘
Press KEYLESS GO button
1
.
The vehicle locks centrally.
The boot lid closes. The locking knobs
in the doors drop down. The turn sig-
nals flash three times. The anti-theft
alarm system* is primed.
i
If you have left the KEYLESS GO key in the
vehicle, the vehicle will not lock. The vehicle is
only locked if the turn signals flash three times.
However, you will be able to lock the vehicle if
you are carrying a second KEYLESS GO key on
your person.
Individual settings
If you frequently drive alone, you may wish
to change the function of the KEYLESS GO
key. With this setting, only the driver’s
door and the fuel filler flap unlock when
you grasp the driver’s door handle.
왘
To activate or deactivate: press the
Œ
and
‹
buttons simultaneously
for about six seconds until the battery
check lamp flashes twice.
The KEYLESS GO key will then function
as follows:
왘
To unlock the driver’s door: grasp the
door handle.
왘
To unlock the vehicle centrally:
grasp the door handle on the front-pas-
senger door or a rear door.
The locking knobs in the doors pop up.
The turn signals flash once. The anti-
theft alarm system* is deactivated.
왘
To lock the vehicle centrally: touch
the outside of the door handle or press
the locking button on the boot
(
컄
page 253).
The locking knobs in the doors drop
down. The turn signals flash three
times. The anti-theft alarm system* is
activated.
Restoring the factory settings
왘
Press the
Œ
and
‹
buttons si-
multaneously for about six seconds un-
til the battery check lamp flashes
twice.
Checking the batteries
왘
Press the
‹
or
Œ
button.
The batteries in the remote control are
functional if the battery check lamp
lights up briefly. If it does not light up,
replace the batteries immediately
(
컄
page 499).
i
You may inadvertently lock or unlock the ve-
hicle by pressing the buttons on the KEYLESS
GO key.
P80.61-2164-31