Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 263 / 588

241
Operating systems
Instrument cluster operating system
Change of direction announced with
lane recommendation
Example display
1
Road in which the change of direction
takes place
2
Change of direction icon
3
Distance to the change of direction and
distance graphic
4
Lane recommendation
On multi-lane roads, COMAND can display
a lane recommendation
4
for the next
change of direction. During the change of
direction, additional lanes may be dis-
played.
Further information on lane recommenda-
tions (
컄
page 173).
i
COMAND can only display the lane recom-
mendations if the relevant data is available on
the digital map.
Navigation status displays in the instru-
ment cluster
The following messages can be displayed
in the multi-function display when route
guidance is active:
앫 <
You have reached the destination.
앫
“Area of dest. reached”
You have arrived in the area of the des-
tination. This message appears if the
special destination is relatively large,
for example.
앫
“New route”
COMAND calculates a new route, e.g.
because you have deviated from the
calculated route or as a result of a traf-
fic jam report. COMAND then contin-
ues route guidance.
앫
“Calculating route”
COMAND is calculating a new route.
COMAND then begins route guidance.
앫
“Off map”
The vehicle’s position is outside the
range of the digital map. The vehicle is
in an off-map position (
컄
page 176).
앫
“Off road”
The vehicle is on a road that is not on
the digital map (
컄
page 176) or the ve-
hicle is no longer on a road, e.g. in a car
park.
P54.32-3372-31
Lane recom-
mendation
display
Meaning
Lane without low-
er boundary line
Lane continues
through change of
direction
Lane with lower
boundary line
Lane added due to
the change of
direction
Lane with arrow Lane recommended
for the change of
direction