Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 550 / 588

528
Practical advice
Towing
i
Switch off the automatic locking feature be-
fore the vehicle is towed (
컄
page 212). You
could otherwise become locked out when push-
ing or towing the vehicle.
!
Only secure the tow cable or towing bar to
the towing eyes, you may otherwise damage the
vehicle.
Opening the front cover
1
Cover
왘
Press the mark on cover
1
backwards
in the direction of the arrow.
왘
Remove cover
1
.
Opening the rear cover
1
Cover
왘
Press the mark on cover
1
backwards
in the direction of the arrow.
왘
Remove cover
1
.
Securing the towing eye
왘
Take the towing eye from the vehicle
tool kit (
컄
page 425).
왘
Screw in the towing eye clockwise to
the stop.
왘
Insert the wheel wrench handle into the
towing eye and tighten.
왘
Stow the wheel wrench in the vehicle
tool kit.
!
Do not tow the vehicle further than 50 km.
Do not exceed a maximum towing speed of
50 km/h. Otherwise, you could damage the
transmission.
왘
Switch on the ignition.
i
You will have to use the ignition lock under-
neath the KEYLESS GO* button on vehicles with
KEYLESS GO* (
컄
page 257) .
왘
Move the transmission selector lever to
N .
왘
Take the wheel wrench out of the vehi-
cle tool kit (
컄
page 425).
왘
Insert the wheel wrench handle into the
towing eye and loosen the towing eye.
왘
Unscrew the towing eye.
왘
Replace the cover and press it until it
engages.
왘
Stow the towing eye in the vehicle tool
kit.
Fitting the towing eye
P00.60-2061-31
P00.60-2058-31
Towing the vehicle
Removing the towing eye