Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 224 / 588

202
Operating systems
COMAND system settings
Setting the time/date format
왘
Select “Vehicle” “System settings”
“Time” “Format” .
The format list appears. The
R
dot in
front of the list entries indicate the cur-
rent setting.
왘
To change the format setting: select
the desired format.
왘
To store the setting and exit the
menu: slide
o m p
.
Setting the reading speed
왘
Select “Vehicle” “System settings”
“Text reader” “Speed” .
The list of possible speeds appears.
The
R
dot in front of the list entry indi-
cates the current setting.
왘
Select the desired speed.
The new setting is stored.
Setting the language
왘
Select “Vehicle” “System settings”
“Text reader” “Language” .
The list of available languages appears.
The
R
dot in front of the list entry indi-
cates the current setting.
왘
Select the desired language.
The new setting is stored.
Switching the help window on or off
왘
Select “Vehicle” “System settings”
“Linguatronic” .
왘
Select “Help window” .
You have switched the help window on
or off. A tick appears when the help
window is switched on.
Voice training
Using voice training, you can fine tune
Linguatronic* to your own voice and thus
improve voice recognition. The ability of
the system to recognise the commands of
other users does not deteriorate as a re-
sult.
Voice training comprises two parts. You
train the system to recognise digits in the
first part and specific commands in the
second part.
Starting new voice training
i
It is only possible to start voice training with
the vehicle stationary. After starting the session,
you will train the system using voice instructions.
왘
Select “Vehicle” “System settings”
“Linguatronic” “Start new individ-
ualisation” .
A prompt appears asking whether you
would like further information.
왘
Select “ Yes” or “ No” .
If you select “No” , the first part of the
voice training begins.
If you select
“Yes” , an information dis-
play will be shown.
왘
To close the display: select “OK” .
The first part of voice training be-
gins.
At the end of the first part, you will see
a prompt asking whether you wish to
begin the second part.
Text reader settings
Linguatronic* settings