Mercedes-Benz S 320 CDI, Owner'S Manual, Page: 204 / 588

182
Operating systems
COMAND navigation system* (dynamic route guidance with RDS-TMC)
Displaying the report list
왘
Select “Navi” “TMC” .
COMAND searches for RDS-TMC sta-
tions. If no traffic reports are available,
you will see a display to this effect.
왘
To close the display: select “OK” .
If stations are available, COMAND
searches for traffic reports. You will
see a display to this effect.
왘
To cancel the search: select “Can-
cel” .
If there are no traffic reports, you will
see a display to this effect.
왘
To close the display: select “OK” .
If there are traffic reports, you will see
a list. The content of the list varies de-
pending on whether route guidance is
active or not.
List when route guidance is not active
When route guidance is not active, the list
shows all the roads, areas or regions for
which reports are available.
1
Country designation (only appears if
there are reports from different coun-
tries)
2
Road concerned
3
Area or region concerned
i
A report may also relate to an area or region
rather than a road, e.g. impaired visibility due to
fog.
왘
To read the report: select a road, an
area or region.
You will find an example of a report on
(
컄
page 183).
왘
To close the list: slide
o m p
.
List when route guidance is active
When route guidance is active, the list only
shows the roads, areas or regions on the
route and for which reports are available.
Displaying RDS-TMC traffic reports
P82.86-5340-31