Mercedes-Benz S 320 CDI, Owner'S Manual

Page: 98 / 588

76
Operating systems
COMAND radio
왘
Slide
o m p
or turn
y m z
when the main
area is selected.
or
왘
Select “Audio” “Audio” “Radio”
“Radio” “Station list” .
The station list appears. The
R
dot in
front of a list entry indicates the cur-
rently selected station. A number in
front of the list entry indicates the pre-
set position in the station preset mem-
ory.
왘
Select a station.
Tuning in stations using manual tuning
i
Manual tuning is only available in the MW,
LW and SW wavebands.
왘
Slide
o m p
or turn
y m z
when the main
area is selected.
Station search scans up or down and
stops at the next station that the radio
can receive.
Tuning in stations using station presets
왘
Select “Audio” “Audio” “Radio”
“Presets” .
or
왘
Press
n
when the main area is select-
ed.
The preset menu appears. The
R
dot
in front of a preset position indicates
that the currently selected station is
stored there.
왘
Select the station preset and briefly
press
n
.
Tuning in stations by entering the fre-
quency manually
왘
Select “Audio” “Audio” “Radio”
“Radio” “Frequency input” .
왘
To increase or decrease the
number: slide
q m r
or turn
y m z
.
i
You can only tune in to currently permitted
numbers.
왘
To select the next number: slide
o m p
.
왘
To set the frequency: press
n
.
COMAND tunes in to the frequency en-
tered.
i
If you enter a frequency in the medium
waveband which is outside the frequency range,
COMAND tunes in to the next lowest frequency.
Twenty stations can be stored in each
waveband.
Storing stations manually
왘
Select “Audio” “Audio” “Radio”
“Radio” “Save station” .
or
왘
Press
n
when the main area is select-
ed.
or
왘
Select “Audio” “Audio” “Radio”
“Presets” .
All three of these will bring up a selec-
tion list. The
R
dot in front of a preset
position indicates that the currently se-
lected station is stored there.
Storing stations