Juniper QFX3000-G QFabric, Deployment Manual, Page: 646 / 652

root@dg0 ~]#
ls /mnt
8.
Issue the mkdir command to create a directory within the mount directory.
root@dg0 ~]#
mkdir /mnt/myusb
9.
Issue the mount /dev/sdb2 /mnt/myusb/ command to mount the external USB
flash drive to the local drive of the Director device.
root@dg0 ~]#
mount /dev/sdb2 /mnt/myusb/
10.
Issue the ls -la /mnt/myusb/ command to verify the contents of your mounted
external USB flashdrive.
root@dg0 ~]#
ls -la /mnt/myusb/
total 1770884
drwxr-xr-x 2 root root 4096 Sep 7 05:16 .
drwxr-xr-x 3 root root 4096 Sep 7 10:15 ..
-rw-r--r-- 1 root root 4249 Sep 7 03:52 mybackup-20110907
11.
Exit the Director device and log back in as root on the Director device.
The following menu appears:
Before you can access the QFabric system, you must complete the initial setup
of the Director group by using the steps that follow.
If the initial setup procedure does not complete successfully, log out of the
Director device and then log back in to restart
this setup menu.
Continue?[y/n] y
Initial Configuration
You may enter the configuration manually or restore from a backup.
Specify a backup file? [y/n] : y
Please specify the full path of the configuration backup file. :
/mnt/myusb/mybackup-20110907
12.
Enter y to continue.
13.
Enter y and specify the path to the backup configuration file located on the external
USB flash drive.
/mnt/myusb/mybackup-20110907
The following messages appear:
Saving temporary configuration...
Configuring peer...
connect error for 1.1.1.2:9001
Configuring local interfaces...
Configuring interface eth0 with [10.49.213.163/24:10.49.213.254]
Configured interface eth0 with [10.49.213.163/24:10.49.213.254]
Configuring QFabric software with initial pool of 4000 MAC addresses
[00:10:00:00:00:00 - 00:10:00:00:0f:3b]
Configuring QFabric address [10.49.213.50]
Reconfiguring QFabric software static configuration
Applying the new Director Device password
Applying the QFabric component password
First install initial configuration, generating and sharing SSH keys.
First install initial configuration, generating SSH keys.
connect error for 1.1.1.2:9001
Shared SSH keys.
Configuration complete. Director Group services will auto start within 30
seconds.
Copyright © 2015, Juniper Networks, Inc. 620
QFX3000-G QFabric System Deployment Guide