Juniper QFX3000-G QFabric, Deployment Manual, Page: 380 / 652

Verifying the QFabric System Control Plane—Virtual Chassis VC0
Purpose Verify that your first Virtual Chassis is operational.
Action Connect to the Junos OS CLI of Virtual Chassis VC0, either from your management
network or from the console port of the master Virtual Chassis member. In operational
mode, enter the
show virtual-chassis status and show interfaces terse commands.
Sample Output
{master:0}
user@vc0>
show virtual-chassis status
Preprovisioned Virtual Chassis
Virtual Chassis ID: c809.2c5d.9f7b
Virtual Chassis Mode: Enabled
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
0 (FPC 0) Prsnt BP0210471476 ex4200-24f 129 Master* N 7 vcp-0
1 vcp-1
1 (FPC 1) Prsnt BP0210460181 ex4200-24f 129 Backup N 2 vcp-0
0 vcp-1
2 (FPC 2) Prsnt BP0210458724 ex4200-24f 0 Linecard N 3 vcp-0
1 vcp-1
3 (FPC 3) Prsnt BP0210477189 ex4200-24f 0 Linecard N 4 vcp-0
2 vcp-1
4 (FPC 4) Prsnt BP0210471467 ex4200-24f 0 Linecard N 5 vcp-0
3 vcp-1
5 (FPC 5) Prsnt BP0210460118 ex4200-24f 0 Linecard N 6 vcp-0
4 vcp-1
6 (FPC 6) Prsnt BP0210458742 ex4200-24f 0 Linecard N 7 vcp-0
5 vcp-1
7 (FPC 7) Prsnt BP0210477198 ex4200-24f 0 Linecard N 0 vcp-0
6 vcp-1
{master:0}
user@vc0>
show interfaces terse
Interface Admin Link Proto Local Remote
ge-0/0/0 up up
ge-0/0/0.0 up up eth-switch
ge-0/0/1 up up
ge-0/0/1.0 up up eth-switch
ge-0/0/2 up up
ge-0/0/2.0 up up eth-switch
ge-0/0/3 up up
ge-0/0/3.0 up up eth-switch
ge-0/0/4 up up
ge-0/0/4.0 up up eth-switch
ge-0/0/5 up up
ge-0/0/5.0 up up eth-switch
ge-0/0/6 up up
ge-0/0/6.0 up up eth-switch
ge-0/0/7 up up
ge-0/0/7.0 up up eth-switch
ge-0/0/19 up up
ge-0/0/19.0 up up eth-switch
ge-0/0/22 up up
ge-0/0/22.0 up up aenet --> ae0.0
ge-0/0/23 up up
Copyright © 2015, Juniper Networks, Inc. 354
QFX3000-G QFabric System Deployment Guide