Juniper QFX3000-G QFabric, Deployment Manual, Page: 439 / 652

Licenses installed:
License identifier: E000185416
License version: 2
Features:
subscriber-acct - Per Subscriber Radius Accounting
permanent
subscriber-auth - Per Subscriber Radius Authentication
permanent
subscriber-addr - Address Pool Assignment
permanent
subscriber-vlan - Dynamic Auto-sensed Vlan
permanent
subscriber-ip - Dynamic and Static IP
permanent
Meaning The output shows a list of the license usage and a list of the licenses installed on the
router or switch. Verify the following information:
•
Each license is present. Licenses are listed in ascending alphanumeric order by license
ID.
•
The state of each license is permanent .
NOTE: A state of invalid indicates that the license key is not a valid license
key. Either it was entered incorrectly or it is not valid for the specific device.
•
The feature for each license is the expected feature. The features enabled are listed
by license. An all-inclusive license has all features listed.
•
All configured features have the required licenses installed. The Licenses needed
column must show that no licenses are required.
Displaying License Usage
Supported Platforms J Series , M Series , MX Series , PTX Series , QFabric System , QFX Series standalone switches ,
T Series
Purpose Verify that the licenses fully cover the feature configuration on the router or switch.
Action From the CLI, enter the
show system license usage
command.
Sample Output
user@host> show system license usage
Licenses Licenses Licenses Expiry
Feature name used installed needed
subscriber-addr 1 0 1 29 days
scale-subscriber 0 1000 0 permanent
scale-l2tp 0 1000 0 permanent
scale-mobile-ip 0 1000 0 permanent
Meaning The output shows any licenses installed on the router or switch and how they are used.
Verify the following information:
413 Copyright © 2015, Juniper Networks, Inc.
Chapter 18: QFabric System Licensing