Juniper QFX3000-G QFabric, Deployment Manual, Page: 386 / 652

There are two methods of importing the configuration file to the QFabric control plane
Virtual Chassis. You can load the configuration file onto a USB flash drive from the Juniper
Networks software download site before inserting the USB flash drive into the Virtual
Chassis USB port, or you can copy and paste the configuration from the following example
(see
“Example: Configuring the Virtual Chassis for the QFX3000-G QFabric System
Control Plane” on page 283 ).
Before you begin:
•
Rack, mount, and install your QFabric system hardware (Director group, Interconnect
devices, and Node devices). For more information, see
“Installing and Connecting a
QFX3100 Director Device” on page 143 , “Installing and Connecting a QFX3008-I
Interconnect Device” on page 155 , and “Installing and Connecting a QFX3500 Device”
on page 211 .
•
Rack, mount, and install your Virtual Chassis hardware (EX4200 switches). For more
information, see
Installing and Connecting an EX4200 Switch .
• Create two Virtual Chassis of four members each. For more information, see Configuring
an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
•
Select a USB flash drive that meets the QFabric control plane Virtual Chassis USB port
specifications. See
USB Port Specifications for an EX Series Switch .
• Use a computer or other device to load the configuration file from the Internet and
copy it to the USB flash drive.
To import the Virtual Chassis configuration file into a USB flash drive:
1.
In a browser, go to
http://www.juniper.net/support/downloads/junos.html
.
The Junos Platforms Download Software page appears.
NOTE: To access the download site, you must have a service contract
with Juniper Networks and an access account. If you need help obtaining
an account, complete the registration form at the Juniper Networks website
https://www.juniper.net/registration/Register.jsp
.
2.
Click
QFX3100
in the
QFX Series
section.
The QFX3100 Download Software page appears.
3.
From the Release list, select the number of the software version for which you want
to download the Virtual Chassis configuration file.
4.
Select the Software tab and then click QFX3000-G QFabric System - Control Plane
Virtual Chassis Configuration in the QFabric System Install Package and Media section.
A login page appears.
5.
Enter your user ID and password and press
Enter
.
6.
Read the End User License Agreement, select the
I agree
option button, and then click
Proceed
.
Copyright © 2015, Juniper Networks, Inc. 360
QFX3000-G QFabric System Deployment Guide