Juniper QFX3000-G QFabric, Deployment Manual, Page: 407 / 652

telnet Telnet to another host
test Perform diagnostic debugging
traceroute Trace route to remote host
Issue the
request component login component-name
command to log in to a Node device
without being prompted for a username or password.
Oscar@qfabric> request component login EE3093
Warning: Permanently added 'qfnode-ee3093,169.254.128.14' (RSA) to the list of
known hosts.
--- JUNOS 11.3I built 2011-11-04 12:46:16 UTC
{master}
Finally, issue the
?
command to view the CLI operational mode commands that Oscar
has permission to use on the Node device. Notice that the CLI prompt now indicates
Oscar’s component access level (
qfabric-operator ) as the username and the Node device
identifier ( EE3093 ) as the host. Additionally, Oscar has fewer CLI commands available
than Adam because of Oscar’s read-only qfabric-operator login class.
qfabric-operator@EE3093> ?
Possible completions:
file Perform file operations
help Provide help information
load Load information from file
op Invoke an operation script
quit Exit the management session
request Make system-level requests
save Save information to file
set Set CLI properties, date/time, craft interface message
show Show system information
start Start shell
test Perform diagnostic debugging
Meaning The output shows that Oscar has full permissions to access the QFabric system CLI, but
only read-only access when he logs in to individual components. Oscar’s permissions on
the QFabric system are the same as Adam’s, but Oscar has fewer permissions than Adam
on the Node device.
Verifying qfabric-user Access
Purpose Verify that Ulf has full access to the QFabric system CLI at the default partition but cannot
access the QFabric system components.
Action From a management station on your network, issue the ssh user @qfabric command and
enter the password to open an SSH session for Ulf to the QFabric system. Issue the ?
command to view the CLI operational mode commands that Ulf has permission to use
on the QFabric system default partition. Notice that these permissions are the same as
those given to Adam and Oscar.
> ssh Ulf@qfabric.network.net
Warning: Permanently added 'qfabric.network.net' (RSA) to the list of known hosts.
Ulf@qfabric.network.net's password:
Last login: Sun Nov 17 17:12:24 2011 from 192.168.28.22
Juniper QFabric Director 11.3.5510 2011-10-23 19:23:31 UTC
RUNNING ON DIRECTOR DEVICE : dg0
381 Copyright © 2015, Juniper Networks, Inc.
Chapter 17: QFabric System Configuration