Juniper QFX3000-G QFabric, Deployment Manual, Page: 536 / 652

fpc-slot slot-number
—(TX Matrix Plus routers and EX4200 and QFX Series only) On the
router or switch, display the text message on the craft interface for a specific Flexible
PIC Concentrator (FPC). Replace
slot-number
with a value from
0
through
31
. On the
switch, display the text message for a specific member of a Virtual Chassis, where
fpc-slot slot-number corresponds to the member ID. Replace slot-number with a value
from 0 through 9 . On the QFX Series, the slot-number is always 0 . On a TX Matrix
Plus router with 3D SIBs replace slot-number with a value from 0 through 63 .
interconnect-device device-id
—(QFabric systems only) Display the text message on the
craft interface display of an Interconnect device within a QFabric system.
lcc number
—(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis
number.
Replace number with the following values depending on the LCC configuration:
•
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
•
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
•
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
•
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
node-device device-id —(QFabric systems only) Display the text message on the craft
interface display of a Node device within a QFabric system.
permanent
—(Optional) Display a text message on the craft interface display or LCD
panel display permanently.
scc
—(TX Matrix routers only) Display the text message on the craft interface display of
the TX Matrix router (switch-card chassis).
sfc number
—(TX Matrix Plus routers only) Display the text message on the craft interface
display of the TX Matrix Plus router (or switch-fabric chassis).
Required Privilege
Level
clear
Related
Documentation
Configuring the LCD Panel on EX Series Switches (CLI Procedure)
•
•
clear chassis display message
•
show chassis craft-interface
•
show chassis lcd on page 569
•
Understanding the Implementation of System Log Messages on the QFabric System
on page 52
Copyright © 2015, Juniper Networks, Inc. 510
QFX3000-G QFabric System Deployment Guide