Juniper QFX3000-G QFabric, Deployment Manual, Page: 463 / 652

Related
Documentation
•
Configuring Link Aggregation
node-group (Resources)
Supported Platforms
QFabric System
Syntax
node-group node-group-name {
network-domain ;
node-device node-device-name;
}
Hierarchy Level [edit fabric resources]
Release Information Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Define Node groups within a QFabric system.
NOTE: The following rules apply to QFabric Node group naming:
•
The network Node group must use the predefined name NW-NG-0. You
must use this name when adding Node devices to the network Node group.
You cannot specify a different name. Also, you can configure only one
network Node group per partition.
•
Node group names must use alphabetic (A through Z and a through z),
numeric (0 through 9), or dash (-) characters.
•
The maximum length of a Node group name is 30 characters.
•
Node group names are case sensitive. For example, MY-NG-1 and my-ng-1
refer to different components.
•
You cannot use the reserved names all , fabric , or director-group as a Node
group name.
The remaining statements are explained separately.
Required Privilege
Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Related
Documentation
•
Configuring Node Groups for the QFabric System on page 395
•
Understanding Node Groups on page 27
437 Copyright © 2015, Juniper Networks, Inc.
Chapter 19: Configuration Statements