Juniper QFX3000-G QFabric, Deployment Manual, Page: 205 / 652

The 90° connector provides more flexibility to position the power cord outside the width
of the chassis. Alternatively, if the power cords will be routed down to the bottom of the
rack, or space limitations prevent you from extending the width of the chassis footprint,
you can use the flat connector to install the power cord (see
Figure 31 on page 179 ).
Figure 32 on page 180 and Figure 33 on page 180 show the power cords installed on the
wiring trays in the two different positions. Figure 34 on page 181 shows the wiring tray
being installed in the chassis, using the flat connector.
Figure 30: Assembling a Power Cord Using a 90° Connector
g050162
Figure 31: Assembling a Power Cord Using a Flat Connector
g050163
179 Copyright © 2015, Juniper Networks, Inc.
Chapter 10: Installing a QFX3008-I Interconnect Device