Juniper QFX3000-G QFabric, Deployment Manual, Page: 512 / 652

request fabric administration director-group change-master
Supported Platforms QFabric System
Syntax request fabric administration director-group change-master (director-device
director-device-name)
Release Information Command introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Select a Director device to become the new primary device within
a Director group. The specified device becomes the new master Director device, and the
previous master Director device becomes a backup Director device.
Options none —Change the device that controls the Director group. Assign the current backup
Director device as the new master and the current master Director device as the
backup.
director-device director-device-name —Specify which Director device should become the
primary device within the Director group.
Required Privilege
Level
admin
Related
Documentation
show fabric administration inventory director-group status on page 589
•
•
Performing the QFabric System Initial Setup on a QFX3100 Director Group on page 362
•
Understanding the Director Group on page 18
List of Sample Output request fabric administration director-group change-master on page 486
Sample Output
request fabric administration director-group change-master
user@qfabric>
request fabric administration director-group change-master
Do you intend to switchover mastership? [yes,no] (no) yes
Cluster master successfully switched
Copyright © 2015, Juniper Networks, Inc. 486
QFX3000-G QFabric System Deployment Guide