Juniper QFX3000-G QFabric, Deployment Manual, Page: 106 / 652

The MX5, MX10, MX40, and MX80 routers support the following types of MICs:
•
A built-in 10-Gigabit Ethernet MIC with four 10-Gigabit Ethernet ports
•
Two front-pluggable MICs
A feature ID is assigned to every license upgrade for enhancing port capacity.
Table 15 on page 80 displays the chassis types and their associated port capacity, I2C
ID, base capacity, feature ID, feature name, and the final capacity after a license upgrade.
Table 15: Upgrade Licenses for Enhancing Port Capacity
Upgrade Capacity
Feature ID
and
Feature
Name
Base Capacity I2C ID
Port
Capacity Chassis
Type
Slot 1 and 2
• 1/MIC0
•
1/MIC1
f1—MX5 to
MX10
upgrade Slot 1
• 1/MIC0
0x556 20G MX5
Slot 2 and first 2 ports on Slot 0
• 1/MIC1
• First 2 ports on 0/MIC0
f2—MX10 to
MX40
upgrade Slot 1 and 2
• 1/MIC0
• 1/MIC1
0x555 40G MX10
Slot 2 and all ports on Slot 0
•
1/MIC1
• All 4 ports on 0/MIC0
f3—MX40
to MX80
upgrade Slot 1, SLot 2 and first 2
ports on Slot 0
•
1/MIC0
• 1/MIC1
•
First 2 ports on 0/MIC0
0x554 60G MX40
When installing an upgrade license for enhancing port capacity on MX5, MX10 and MX40
routers, consider the following:
• To upgrade an MX5 router to MX80 router capacity, licenses for all three features (f1,
f2, f3) must be installed. All three features can be provided in a single license key.
•
To upgrade an MX10 router to MX40 router capacity, installing a license key with f2
feature is sufficient.
• Non-applicable feature IDs in a license key reject the upgrade license. For example:
•
An f1 feature ID on an MX10 upgrade license key rejects the license.
•
Feature IDs f1 and f2 on an MX40 upgrade license key reject the entire license.
Related
Documentation
•
Junos OS Feature Licenses on page 77
•
License Enforcement
•
Software Feature Licenses
•
Verifying Junos OS License Installation on page 412
Copyright © 2015, Juniper Networks, Inc. 80
QFX3000-G QFabric System Deployment Guide