Juniper QFX3000-G QFabric, Deployment Manual, Page: 456 / 652

interconnect-device (Aliases)
Supported Platforms QFabric System
Syntax interconnect-device interconnect-device-name {
assigned-interconnect-device-name;
}
Hierarchy Level [edit fabric aliases]
Release Information Statement introduced in Junos OS Release 12.2 for the QFX Series.
Description (QFabric systems only) Specify the mapping of user-defined names to QFabric system
Interconnect devices.
NOTE: The following rules apply to QFabric component alias naming:
•
Alias names must use alphabetic ( A through Z and a through z ), numeric
( 0 through 9 ), or dash ( - ) characters.
•
The maximum length of an alias name is 30 characters.
•
Alias names are case sensitive. For example,
MY-NG-1
and
my-ng-1
refer to
different components.
•
You cannot use the reserved names
all
,
fabric
, or
director-group
as an alias
name.
Options
interconnect-device-name
—Specify a user-defined name for a QFabric system Interconnect
device.
assigned-interconnect-device-name —Specify the Interconnect device identifier or name
that has been provided. Identifiers are usually auto-generated by the Interconnect
software, and names are usually provided by the administrator of the default partition.
Required Privilege
Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Related
Documentation
•
Configuring Aliases for the QFabric System on page 382
•
Understanding Interconnect Devices on page 21
Copyright © 2015, Juniper Networks, Inc. 430
QFX3000-G QFabric System Deployment Guide