Juniper QFX3000-G QFabric, Deployment Manual, Page: 625 / 652

show fabric administration inventory node-devices
Supported Platforms QFabric System
Syntax show fabric administration inventory node-devices node-device-name
Release Information Command introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Display the Node devices that belong to the QFabric system.
NOTE: If your Node devices do not appear in the output of the show fabric
administration inventory node-devices command, check the cabling of your
system.
Options none —Display all Node devices within the QFabric system.
node-device-name
—Display a specific Node device within the QFabric system.
Required Privilege
Level
admin
Related
Documentation
Configuring Aliases for the QFabric System on page 382
•
•
Configuring Node Groups for the QFabric System on page 395
•
show fabric administration inventory node-groups on page 601
•
show fabric administration inventory on page 584
•
Understanding Node Devices on page 24
List of Sample Output show fabric administration inventory node-devices on page 600
show fabric administration inventory node-devices device-name on page 600
Output Fields Table 103 on page 599 lists the output fields for the
show fabric administration inventory
node-devices
command. Output fields are listed in the approximate order in which they
appear.
Table 103: show fabric administration inventory node-devices Output Fields
Field Description Field Name
Type of QFabric system component being viewed. Item
Hardware serial identifier of a QFabric system component. Identifier
Status of a QFabric system component: either Connected or Not Connected , depending on whether
or not the Director software has detected keepalive messages for the listed component.
Connection
599 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands