Juniper QFX3000-G QFabric, Deployment Manual, Page: 406 / 652

file Perform file operations
help Provide help information
load Load information from file
monitor Show real-time debugging information
mtrace Trace multicast path from source to receiver
op Invoke an operation script
ping Ping remote target
quit Exit the management session
request Make system-level requests
restart Restart software process
save Save information to file
set Set CLI properties, date/time, craft interface message
show Show system information
ssh Start secure shell on another host
start Start shell
telnet Telnet to another host
test Perform diagnostic debugging
traceroute Trace route to remote host
Meaning The output shows that Adam has received the proper permissions to access the QFabric
system CLI and log in to individual components with management-level access.
Verifying qfabric-operator Access
Purpose Verify that Oscar can access the QFabric system CLI at the default partition and view
the CLI on the QFabric system components.
Action From a management station on your network, issue the
ssh user @qfabric
command and
enter the password to open an SSH session for Oscar to the QFabric system. Issue the
? command to view the CLI operational mode commands that Oscar has permission to
use on the QFabric system default partition. Notice that these permissions are the same
as those given to Adam.
> ssh Oscar@qfabric.network.net
Warning: Permanently added 'qfabric.network.net' (RSA) to the list of known hosts.
Oscar@qfabric.network.net's password:
Last login: Sun Nov 19 19:21:29 2011 from 192.168.28.14
Juniper QFabric Director 11.3.5510 2011-10-22 18:33:41 UTC
RUNNING ON DIRECTOR DEVICE : dg1
Oscar@qfabric>
Oscar@qfabric> ?
Possible completions:
clear Clear information in the system
configure Manipulate software configuration information
file Perform file operations
help Provide help information
load Load information from file
op Invoke an operation script
ping Ping remote target
quit Exit the management session
request Make system-level requests
restart Restart software process
save Save information to file
set Set CLI properties, date/time, craft interface message
show Show system information
Copyright © 2015, Juniper Networks, Inc. 380
QFX3000-G QFabric System Deployment Guide