Juniper QFX3000-G QFabric, Deployment Manual, Page: 610 / 652

show fabric administration inventory
Supported Platforms QFabric System
Syntax show fabric administration inventory
<brief | detail | summary | terse>
<director-group (status)>
<infrastructure (fabric-controls | fabric-managers | diagnostic-routing-engines)>
<interconnect-devices interconnect-device-name>
<node-devices node-device-name>
<node-groups node-group-name>
<summary>
Release Information Command introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Display all devices that belong to the QFabric system. You can
narrow the level of output by specifying a device type.
NOTE: If your Node devices do not appear in the output of the
show fabric
administration inventory
command, check the cabling of your system.
Options
none
—Display all devices within a QFabric system.
brief | detail | summary | terse —(Optional) Display the specified level of output.
director-group (status)
—(Optional) Display the status for the Director group within a
QFabric system.
infrastructure (fabric-controls | fabric-managers | diagnostic-routing-engines)
—(Optional)
Display information for the fabric control Routing Engine, fabric manager Routing
Engine, and diagnostic Routing Engine running on the Director group for the QFabric
system.
interconnect-devices interconnect-device-name
—(Optional) Display a specific Interconnect
device within a QFabric system.
node-devices node-device-name
—(Optional) Display a specific Node device within a
QFabric system.
node-groups node-group-name —(Optional) Display a specific Node group within a QFabric
system.
Required Privilege
Level
admin
Related
Documentation
Performing the QFabric System Initial Setup on a QFX3100 Director Group on page 362
•
•
Configuring Aliases for the QFabric System on page 382
•
Configuring Node Groups for the QFabric System on page 395
Copyright © 2015, Juniper Networks, Inc. 584
QFX3000-G QFabric System Deployment Guide