Juniper QFX3000-G QFabric, Deployment Manual, Page: 597 / 652

show chassis lcd (XRE200 External Routing Engine in EX8200 Virtual
Chassis) on page 576
show chassis lcd interconnect-device (QFabric Systems) on page 579
show chassis lcd node-device (QFabric Systems) on page 581
Output Fields Table 97 on page 571 lists the output fields for the
show chassis lcd
command. Output
fields are listed in the approximate order in which they appear.
Table 97: show chassis lcd Output Fields
Field Description Field Name
Member ID of the device whose content is being displayed.
member number
(XRE200 External
Routing Engine)
FPC slot number of the switch whose content is being displayed. The number is always 0 , except
for EX4200 switches in a Virtual Chassis, where it is the member ID value.
On EX6200 switches, EX8200 switches, and XRE200 External Routing Engines, no slot number
is displayed.
On XRE200 External Routing Engines, this field appears under the member number field for each
member device in the EX8200 Virtual Chassis.
Front panel contents for slot
Front panel contents
(EX6200,
EX8200 switch, XRE200 External
Routing Engine, and QFX Series)
The first line displays the hostname (for Virtual Chassis members, displays the member ID, the
current role, and hostname; for EX8200 switches, displays
RE
and the hostname). The second
line displays the currently selected port parameter of the Status LED and the alarms counter. The
Status LED port parameters are:
• ADM —Administrative
• SPD —Speed
•
DPX
—Duplex
•
POE
—Power over Ethernet (EX3200 and EX4200 switches only)
LCD screen
Current state of the Alarms, System, and Master LEDs (chassis status LEDs).
LEDs status
Names of the interfaces on the switch. Interface
State of the currently selected port parameter of the Status LED for the interface. The Status
LED port parameters are:
NOTE: The XRE200 External Routing Engine always displays the NA parameter. The QFX Series
products do not have any of the port parameters listed below.
•
ADM —Administrative
•
SPD
—Speed
•
DPX
—Duplex
• NA —Not applicable.
•
POE
—Power over Ethernet
LED (ADM/SPD/DPX/POE)
On standalone EX Series and QFX Series switches, always 0 . On EX Series Virtual Chassis member
switches, member ID of the Virtual Chassis member whose LCD menu is displayed.
fpc x
571 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands