Juniper QFX3000-G QFabric, Deployment Manual, Page: 427 / 652

[edit snmp]
user@switch#
set trap-group “qf-traps” destination-port 155 targets 192.168.0.100
NOTE: You do not need to include the
destination-port
statement if you
use the default port 162.
The trap group qf-traps is configured to send traps to 192.168.0.100.
Results From configuration mode, confirm your configuration by entering the
show
command. If
the output does not display the intended configuration, repeat the instructions in this
example to correct the configuration.
[edit]
user@switch#
show
snmp {
name "snmp qfabric";
description "qfabric0 system";
location "Lab 4 Row 11";
contact "qfabric-admin@qfabric0";
client-list list0 {
192.168.0.0/24;
}
community public {
authorization read-only;
clients {
197.170.0.0/24 restrict;
}
}
trap-group qf-traps {
destination-port 155;
targets {
192.168.0.100;
}
}
}
If you are done configuring the device, enter
commit
from configuration mode.
Related
Documentation
Understanding the Implementation of SNMP on the QFabric System on page 50
•
•
snmp
Configuring Graceful Restart for QFabric Systems
Supported Platforms
QFabric System
When you configure graceful restart in the QFabric CLI, the QFabric system applies the
configuration to the network Node group to participate in graceful restart operations
with devices external to the QFabric system. Such configuration preserves routing table
state and helps neighboring routing devices to resume routing operations more quickly
401 Copyright © 2015, Juniper Networks, Inc.
Chapter 17: QFabric System Configuration