Juniper QFX3000-G QFabric, Deployment Manual, Page: 518 / 652

Syntax (TX Matrix Plus
Router)
request system halt
<all-chassis | all-lcc | lcc number | sfc number>
<at time>
<backup-routing-engine>
<both-routing-engines>
<other-routing-engine>
<in minutes>
<media (compact-flash | disk)>
<message "text">
Syntax (MX Series
Router)
request system halt
<all-members>
<at time>
<backup-routing-engine>
<both-routing-engines>
<in minutes>
<local>
<media (external | internal)>
<member member-id>
<message "text">
<other-routing-engine>
Syntax (QFX Series) request system halt
<all-members>
<at time>
<director-device director-device-id>
<in minutes>
<local>
<media >
<member member-id>
<message "text">
<slice slice>
Release Information Command introduced before Junos OS Release 7.4.
other-routing-engine
option introduced in Junos OS Release 8.0.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for the QFX Series.
director-device
option introduced for QFabric systems in Junos OS Release 12.2.
backup-routing-engine
option introduced in Junos OS Release 13.1.
Description Stop the router or switch software.
NOTE: When you issue this command on an individual component in a QFabric
system, you will receive a warning that says “Hardware-based members will
halt, Virtual Junos Routing Engines will reboot.” If you want to halt only one
member of a Node group, use the
member
option from the Node group CLI.
You cannot issue this command from the QFabric CLI.
Options
none
—Stop the router or switch software immediately.
Copyright © 2015, Juniper Networks, Inc. 492
QFX3000-G QFabric System Deployment Guide